GHESS 5.2-7.2-TH All in one PV Storage Hybrid System

System Features


  • Backup: automatic on / off-grid switching, free from power outage 

  • High efficiency: with high-voltage battery packs, 8% higher than 48V similar system

  • 3-phase: maximizing self-consumption, 3-phase emergency power supply

  • LiFePO4 battery: longer lifecycle & safety assured

  • Local support: professional service team & sufficient stock nReliability: over 2000 units of storage inverters & 1000 systems applications


Storage system

GHESS 5.0_7.2KWH_T All in one
System parameters
Nominal/useable capacity [kWh]

7.2 / 5.76 @ 80 % DoD

InstallationAll-in-one cabinet

5 years standard,  battery 10 years extendable

PV side input

Max. input power [kW]5.2
MPPT voltage range [V]350-700
MPPT tracker1
Battery side input
Operating voltage range [V]144 @ [120, 500]
Max. charging power [kW]4.0
Max. charging current [A]18
Charging/discharging efficient

97 % / 96.5 %

AC output-on grid
Max. output power [kW]5.0
Output voltage range [V]

3N~400, 324-436, 437-460 (<10min)

AC output-off grid (Optional)
Rated voltage & frequency [V/Hz]400±2%,50±2%

Output power [kW]

Rated power 2.5,  instantaneous power 5.0
Power factor[-0.7, +0.7]
Battery packs

The lithium iron phosphate battery pack

Nominal capacity [kWh]6.0

Module / unit

H48V50Ah lithium battery module*3 modules in string

Life cycle

80% DOD for 6000 life cycles

Visual interface

Local EMS & Webportal  & Smart Apps


7  inch color touch screen
Interface communicationRS485 / RS232 / USB / Ethernet / Wifi

Display interface of EMS



Work Priority & Mechanism

1.When the grid is normal:

  • Daytime: If there is enough sunshine, energy generated by PV supplies the load first and then charges battery packs, if the load power is covered and battery is full charged, surplus energy will be fed into the public grid to win the FIT tariff.

  • Night or no enough sunshine: the hybrid system first discharge the battery pack to cover the load,if the energy is still not sufficient, the grid will power the rest family load.

2.When the grid is failed or abnormal 

  • Auto-switch to off grid: it has device has integrated backup function. So when the device sensors the drop / change of the grid voltage, it disconnects the relay completely and then shifts from on-grid to off-grid mode. Under the off-grid mode, the important load is powered by battery.

  • Auto-switch to on grid: When the device sensors that the grid is back to normal, it stops running under off-grid mode and then closes it's internal relay. The system is running under on-grid mode again.